Digital Model of the University of Sonora Campus through Photogrammetry with Drones

Authors

DOI:

https://doi.org/10.36790/epistemus.v17i34.263

Keywords:

Construction management, Aerial photogrammetry, Drone, Digital model

Abstract

The objective of this study was to provide a perspective of the aerial photogrammetry’s scope to carry out different activities in construction engineering in general. Additionally, to determine if a commercial drone is able to perform tasks that facilitate work in some administrative management processes at the University of Sonora for purposes of logistics, planning, maintenance, and work progress records inside the campus. Comparisons were made between physical field measurements in a traditional way, and digital measurements in the 3D point cloud model generated by the software. From this comparison, an average value of 3.7 millimeters of variation per linear meter was obtained.

Downloads

Download data is not yet available.

References

McKinsey Global Institute, "Reinventing construction: a route to higher productivity," McKinsey & Company, 2017.

V. Charlesraj and N. Rakshith, "Stakeholder perspectives on the adoption of drones in construction projects," Kitakyushu, Japan, 2020. Doi: 10.22260/ISARC2020/0168. DOI: https://doi.org/10.22260/ISARC2020/0168

C. Loveless, "Drones in Construction," Available at SSRN, pp. 1-30, 2017. DOI: https://doi.org/10.2139/ssrn.3111338

T. Umar, "Applications of drones for safety inspection in the Gulf Cooperation Council construction," Engineering, Construction and Architectural Management, 2020. Doi: 10.1108/ECAM-05-2020-0369. DOI: https://doi.org/10.1108/ECAM-05-2020-0369

D. Arba, "Using Unmanned Aerial Vehicles for Automated BIM-based Construction Progress & Reporting," PM World Jurnal, vol. 9, no. 8, pp. 1-15, 2020.

K. Korkmaz and S. Mohammed, "Evaluating the Use of Drones in the Area of Transportation / Construction," Journal of Architectural Environment & Structural Engineering Research, vol. 03, no. 01, pp. 1-4, 2020. Doi: 10.30564/jaeser.v3i1.1787. DOI: https://doi.org/10.30564/jaeser.v3i1.1787

H. Golizadeh, M. RezaHosseini, D. Edwards, S. Abrishami, N. Taghavi and S. Banihashemi, "Barriers to adoption of RAPs on construction projects: a task-technology fit perspective" Construction Innovation, vol. 19, no. 2, pp. 149-169, 2019. Doi: 10.1108/CI-09-2018-0074. DOI: https://doi.org/10.1108/CI-09-2018-0074

F. Canhete and R. Machado, "The use of drones in urban construction: literature review," International Jounal of Development Research, vol. 10, no. 02, pp. 44388-44396, 2021. Doi: 10.37118/ijdr.20946.02.2021.

F. Mesas and A. García-Ferrer, "Aplicaciones Urbaníticas," in Los drones y sus aplicaciones a la ingeniería civil, Madrid, 2015, pp. 211-219.

M. Oñate, "Tipología de aeronaves pilotadas por control remoto," in Los drones y sus aplicaciones a la ingeniería civil, Madrid, 2015, pp. 49-57.

Y. Li and C. Liu, "Applications of multirotor drone technologies in construction mangement," International Journal of Construction Management, vol. 19, no. 5, pp. 401-412, 2018. Doi: 10.1080/15623599.2018.1452101 DOI: https://doi.org/10.1080/15623599.2018.1452101

D. Saez and A. Beltrán, "Aplicaciones cartográficas," in Los drones y sus aplicaciones a la ingeniería civil, Madrid, 2015, pp. 67-76.

Í. Campo, "Aplicaciones en el control de obras y evaluación de impactos," in Los drones y sus aplicaciones a la ingeniería civil, Madrid, 2015, pp. 149-160.

Y. Jiang and Y. Bai, "Determination of construction site elevations using drone technology," in Construction Research Congress, Tempe, Arizona, 2020. Doi: 10.1061/9780784482865.032 DOI: https://doi.org/10.1061/9780784482865.032

E. Ciampa, L. De Vito and M. Pecce, "Practical issues on the use of drones for construction inspections," Journal of Physics: Conference Series, pp. 1-11, 2019. Doi:10.1088/1742-6596/1249/1/012016 DOI: https://doi.org/10.1088/1742-6596/1249/1/012016

M. Mongelli, d. C. G. I. Roselli, M. Malena, A. Nacuzi and G. de Felice, "3D Photogrammetric Reconstruction by Drone Scanning for FE Analysis and Crack Pattern Mapping of the “Bridge of the Towers”, Spoleto," Key Engineering Materials, vol. 747, pp. 423-430, 2017. Doi: 10.4028/www.scientific.net/KEM.747.423. DOI: https://doi.org/10.4028/www.scientific.net/KEM.747.423

E. Tacuri, L. Lupercio, G. Lupercio and M. López, "Uso de imágenes de RPAS para generación de topografía a detalle," Revista Geoespacial, vol. 14, no. 1, pp. 32-42, 2017. Doi: 10.24133/geoespacial.v14i1.1594.

P. Aparicio, F. Espinoza-Figueroa, M. d. C. Aguirre, P. Mejía and C. Matovelle, "Fotogrametría digital para el levantamiento 3D del sitio arqueológico de Todos Santos, Cuenca (Ecuador)," Estoa, vol. 7, no. 13, pp. 25-35, 2018. Doi: 10.18537/est.v007.n013.a02. DOI: https://doi.org/10.18537/est.v007.n013.a02

R. Melo and D. Costa, "Reducing the gap between work as done and work as imagined on construction safety supported by UAS," Kalmar, Sweden, 2019. Doi: 10.15626/rea8.02. DOI: https://doi.org/10.15626/rea8.02

Secretaría de Comunicaciones y Transportes, Norma Oficial Mexicana NOM-107-SCT3-2019, Diario Oficial de la Federación, 2019.

Unison

Published

2023-02-23

How to Cite

Ramos Corella, M. A., Ibarra Duarte, D. A., Ramírez Uribe, G., Ibarra Torúa, G. K., & Miranda Torres, I. E. (2023). Digital Model of the University of Sonora Campus through Photogrammetry with Drones. EPISTEMUS, 17(34), 7–14. https://doi.org/10.36790/epistemus.v17i34.263

Metrics

Most read articles by the same author(s)

Similar Articles

<< < 

You may also start an advanced similarity search for this article.